Setting up Wifi on Fanvil XU Phones

Setting up Wifi on Fanvil XU Phones

Most Fanvil Devices support wireless Internet access and require the use of a USB wi-fi adapter. Therefore, the device needs to have a USB Portal Please refer to the hardware description below for the supported models.

Hardware
X3U 
X4U 
X5U 
X6
Screen
Color-Screen
Color-Screen
Color-Screen
Color-Screen
Sub-Screen
No
Yes
Yes
Yes
Side key
Yes
Yes
Yes
Yes
USB
No
Yes
Yes
Yes
DSSKEY LED
Yes
Yes
Yes
Yes


MAKE SURE BEFORE PROCEEDING THAT THE WIFI ADAPTER IS PLUGGED INTO THE USB PORT ON THE PHONE

1) When the device is in the default standby mode, press the "Menu" soft button 

2) Move the selection to the basic option and choose it.

3) Go through the list on the next screen until you see [WLAN] to enter the setting interface.
4) if it shows disabled, click the right arrow key and the "Ok" soft button.

5) Press the soft button for "Scan" and select the wireless network and use the left and right keys to activate it. Enable the device to search the current wireless network automatically.
6) Select the available network, enter the user name and password to connect successfully. Once completed you will see an Icon showing it's connected in the top righthand corner on the main page like in the first photo above.


NOTE: The phone may reboot a few times to download the configuration from 3CX, and or newer firmware. Once completed you should see the expected extension or hot desk.
Further configuration may need to be completed if this phone is using an SBC, please contact your administrator if this is the case.



    • Related Articles

    • 3CX Web Client Quick Guide

      The 3CX Web Client is easy to use and combines all the features you need to efficiently communicate, collaborate and connect with colleagues, partners and customers, straight from your browser. From this one interface, you can easily make calls, view ...